Home - 2018

Year: 2018

How to Know if You Need TRT

Posted on November 30, 2018 in Health

News about low testosterone or testosterone deficient, commonly known as “Low T,” seem to be widespread now a days. According to recent studies, prescriptions tripled within the past years for men over the age 40 and above. However, the hormone replacement therapy for men may not be for everyone.

It is imperative that you consult your doctor, get tested, and be diagnosed accordingly. Never do self-medication. If you are not sure where to go, you’ll find many testosterone replacement clinics within Australia, where you can get checked.

 

Who needs testosterone replacement therapy?

Low testosterone is not a disease on its own, but oftentimes a natural occurrence that comes with age. A man can have low testosterone, but still be fit and well physically, mentally, and sexually. This is why the diagnosis consists of two parts, namely the number of testosterone, and the symptoms.

Men with low testosterone or testosterone deficiency syndrome, or androgen deficiency in aging men (ADAM), often have low sex drive, erectile dysfunction, decreased muscle mass, and fatigue, lack of focus and concentration, and depression. However, these symptoms can also have many possible causes. Usually, the only way to confirm a diagnosis is a trial period of treatment and monitoring. Treatment can be in a few months, and the doctor will observe whether the symptoms improve or testosterone level increases.

 

Misinformation and Overtreatment

Misinformation can lead to unnecessary treatment. A number of men also perceive testosterone replacement therapy (TRT) as a fountain of youth. Many people are being treated for have low testosterone, but no symptoms. Some are also being treated who have symptoms, but their testosterone level is fine. The two really need to go together to safely recommend the treatment. Another mistake is faulty testing. A man’s testosterone is at its peak in the morning, so blood should be drawn in those hours. Blood tests should be scheduled before 11 a.m.

Unnecessary testosterone replacement therapy can be very risky. Risks include higher chance of heart attack or stroke, mood swings and aggression, smaller testicles, and urinary symptoms, and so on.

TRT is not advised on men with certain medical conditions such as metastatic prostate cancer, untreated sleep apnea or severe urinary problems. Young men hoping to start a family should not have the therapy as well because it can lead to infertility as it can lower sperm count.

 

Under-treatment

On the flipside, low testosterone is sometimes undertreated. A large numbers of men who would benefit from the therapy, but are not being tested because they do not know about it or fear of taking it. Chronic conditions often coincide with low testosterone as well, including HIV/AIDS, diabetes, and kidney failure. Because their symptoms can easily be blamed on their chronic condition, most of these men with these illnesses are never tested.

 

Bottom Line

Consult your doctor to make sure you really need the therapy. Otherwise, find out whether you have other medical conditions that are causing the symptoms or low testosterone level that need to be treated.

 

Finding Used Geothermal Drilling Rigs

Posted on October 23, 2018 in Energy

 

A big amount of heat is available in the earth’s core. This is used to heat liquid that is sent down to depths where heat is very high and the liquid is returned to the surface. If this geothermal heat is utilized for heating of building and other similar applications, the site for drilling is in the vicinity. But if the temperature can be raised up to 135 degrees centigrade or higher, it is used to generate electricity. In this case, it would be best to opt for used geothermal drillings rigs.

In situations like this, the bore site is away from the area where there is a need to use electricity. Typically, the temperature inside increases at about 25 degree per kilometer. In this, there needs to drill a few more kilometers in order to transfer enough amount of heat for geothermal applications. Since drilling rigs are often expensive, it would be a practical choice to use a used geothermal rig.

 

Finding Used Rigs

Today, search engines play an important role in our lives like Google, Yahoo, and Bing. These can be very useful when looking for good sources of used drill rigs for sale. There are many companies now that offer these rigs and have established their web presence. In most cases, these companies also have new rigs, but these ones are more expensive. These kinds of drills are mounter on caterpillar tracks to provide mobility. These configurations are very helpful in moving the drill rigs around the target sites.

 

Getting the Better Option

Since deeper drilling is a lot more expensive, the effort when doing drilling operations looks for locations where anomalies in the structure of the earth cause higher temperature magma to come near the surface. This makes it a lot cheaper to drill these sites where you can get higher temperatures with shorter bore holes.

For the kind of applications where the bore hole is distant from the site of application, you can easily drill for tapping geothermal energy at these locations. Used geotechnical drill rigs are delivered by selling companies directly to the sites.

Since the equipment is expensive, outright buying might not make sense in various situations. Financing options offered by banking institutions will be a great option. The loan can be paid off from cash flow that comes in various form. Thus, it is a good decision to buy a used geothermal drill rig for sale. From locating the source, you can begin with the short list from web search. The next step is to narrow down the list by talking to clients. A recommendation coming from a satisfied client is a good alternative.

Drilling wells is definitely a tough job, even for experienced drillers. However, making sure that you have the best and right drilling equipment is something that you need to keep in mind. You can find various dealers online that offer used drill rigs, thus be sure that you do your research before starting to dig.

 

Bunded Tanks in Different Industries

Posted on October 23, 2018 in Energy

If you are looking for the best storage solution for the fuel needs of your business, then bunded tanks will be the most reliable and safest option available today. At the same time, they are also required by law so you can rest assured that this is something that your business can greatly benefit from.

If your current business has fuel storage needs and you are reviewing the different options when choosing the right type of oil tank, you need to know the most important information about it. Here is a list of some of the industries that make use of these tanks and are enjoying their significant benefits.

Utilizing Bunded Fuel Tanks in Industry

Agriculture

Being in the agricultural industry can be very labor intensive and demanding kind of business to be a part of. Rearing livestock and growing crops need a lot of large capacity storage tanks for both food and water and the use of heavy machines that depend on fuel to keep the business going.

For farms in rural and isolated locations, their fuel should be purchased in bulk since depletion of reserves can take a long time to recover from and can even cause immeasurable damages to the business.

Bunded tanks provide both farm owners and agricultural businesses the needed protection to ensure that accidents will be prevented, thus, avoiding financial losses and costly environmental damages.

 

Aviation

This industry deals with transporting freight and passengers around the world using air travel. Travelling at a very high speed needs a great amount of fuel for flights, thus, airports and hangars should be prepared to accommodate these needs.

The several aircrafts on the ground and in the air needs huge amounts of fuel storage. With bunded fuel tanks, the industry is given an important safety precautions that can reduce the risk of spillages which can be very fatal if they react badly with other types of substances and chemicals needed to keep the aircraft running.

 

Ship Building

Ships need fuel and other chemicals to transfer them from A to B. This is where tanks become very useful. There is a bigger danger of fuel spill in shipyards as even the smallest spill could contaminate a large area of water, thus causing harm to various species of birds, fish, and others in the sea, as well as on land and beaches. A bunded fuel tank is a significant requirement for environmentally responsible businesses.

 

Construction

The construction industry is majorly reliant on different building materials like concrete, lumber, and bricks and there are various pieces of machinery involved in this industry. It also needs vehicles for transportation to get the job done. These vehicles are usually diesel or petrol fueled which means that construction businesses should have fuel ready.

The many benefits that this type of tank has to offer is a proof like we are seeing it in many industries-making the job easier and providing a safer environment for everyone.

Tags: ,

Top

Maintaining A Waterjet Machine

Posted on July 31, 2018 in Machine Repairs

Upon getting your very first waterjet machine, you might have been overwhelmed on the first days of undergoing the necessary training. But undergoing it is important and once it’s done, you will be confident knowing that can operate the machine, as well as how to properly maintain it.

But it will be after some weeks or months before you can actually have your very first maintenance or longer before you have to rebuild pumps. When these things happen, you might have already forgotten the things that you have learned. This is the time when you need to consider the help of someone or one from the distributor to provide advanced training to properly operate the machine and a refresher on how to perform maintenance.

 

Frequency of maintenance

A waterjet machine needs maintenance. You can expect that you will have to change the nozzle parts, as well as the pump parts. The nozzle parts are changed more frequently compared to the pump parts. At the same time, you need to have some spares ready so you won’t have to put on hold the machining while you wait for the spare parts.

If you have hard or dirty water you may need to maintain all of them or just buy a filtration system and water softener.

 

Ease of maintenance

In most cases, any person who could change the brake pads is capable of keeping an abrasive jet with just a day of training with a manual. Mixing tubes that wear out can be replaced easily but pumps will require regular seal changes. Considering the design of the pump, the seals could be easy and quick or awkward and time consuming to change.

 

Reducing maintenance

Maintaining a water jet cutter can be easy but it would be so much better if you can lessen the need to maintain it.

 

Start with clean water

If the water has some dissolved chemicals or particles are present, this can accumulate on a high-pressure component and encourage wear. These dissolved minerals could become deposits on the top of the jewel and cause the machine to cut inefficiently or worse, deflect it sideways. Likewise, particles can cause the machine to misalign and up the mixing tube. Dirt in high-pressure plumbing are considered to be bullets that can crack the jewel.

One thing that greatly impacts maintenance is water quality. Quality water means lesser maintenance and a lot more time to cut and make money with the machine.

 

Be clean

Even the tiniest of dirt can have distressing effects on the life of the nozzle and the component as a whole. As water jet cutting machine often operate in harsh environments, the kind that is surrounded with abrasives and machining tools, it’s important to stay vigilant. Doing so will ensure that everything will be as clean as it can be in order to avoid any unnecessary maintenance.

 

Top

3D Printing Melbourne: Mistakes to Avoid when Designing a 3D Model

Posted on July 27, 2018 in Printing

When it comes to 3D printing in Melbourne, no such thing as one-size-fits-all approach as the process itself can be very confusing. There are different kinds of software being used, print in various materials, and various printing technologies. This is why it’s no wonder that some people feel lost when designing a 3D model. Below are some mistakes that should be avoided if you want to turn your 3D model into a 3D print.

 

Avoid these Mistakes when Designing a 3D Model

1. Ignoring the Guidelines for Materials to be Used

Each printing material is unique. Some materials are strong or brittle, solid or flexible, rough or smooth, light or heavy, etc. This means that a single object needs to be ideally designed for a particular material. Your choice of printing material will determine the most basic design guidelines that should be followed.

 

2. Ignoring the Printing Technology

It is not only the chemical characteristic of the printing material that is different, but even the technology that is used in printing each one of them. One good example is interlocking parts. In materials such as Polyamice, ABS, or Alumide, it is possible to print interlocking-parts. But in Silver, Gold, or Bronze, it’s not possible. This happens not because of the material, but the technology utilized in printing the materials.

 

3. Ignoring the Wall Thickness

Any problem that is linked to the wall thickness is by far among one of the common reasons why there are some three-dimensional models that cannot be printed. There are some instances wherein the wall is too thin. These types of walls make very small parts on the model, making them not capable to be printed or tends to be fragile and will break off easily. There are some cases when very thick walls can generate a lot of internal stress which can cause it to crack and break.

 

4. Ignoring the File Resolution

When it comes to 3D printing, the commonly used file format is the STL or Standard Triangle Language. This means that the design would be translated into triangles. The majority of 3D modelling software offer the option to export the designs to STL file and set the necessary solution.

 

5. Ignoring the Software Guidelines

Today, there are various 3D modelling software packages that are available. Some of them were designed to create 3D prints while others are used by 3D artists and the designs often require additional editing before they can provide a printable 3D model.

3D printing is widely utilized in Melbourne and if you are one of the many who is benefiting from it, make sure that you avoid these mistakes. Doing so will help you maximize the use of the technology- making it a worthy investment.

 

Tags:

Top

How Important is Machine Repair?

Posted on July 25, 2018 in Machine Repairs

The popular saying prevention is better than cure is very true and can in fact be applied to the many aspects of life, even in business. When it comes to the of machine for instance, maintenance plays an important role to make sure that the machine is at its best performance and will deliver the expected results. Failure to do so can lead to big losses and this is something that none of us would want to happen. For those who do not value the importance of machine repair and regular maintenance, the benefits of doing so listed below will definitely change your minds.

 

Benefits of Repair and Maintenance

Improves Performance

Highly maintained just performs better compared to those that are not. For instance, printers will have less wasted toner with the help of maintenance and will be able to increase the print volume. At the same time, toner application will be so much smoother and any streak or marks will be kept at bay. With regular maintenance, print quality will always be at its best.

 

Prevents Damage

A simple check to make sure that all parts are operating and functioning properly can help catch problems immediately, thus preventing any damage that may require extensive repairs. In addition, machine maintenance will minimize wear and tear which can prolong the life of the machine.

 

Improves Efficiency

Less downtime will mean that the machine can produce more. Machine repair and maintenance can also eliminate any distraction that are caused by performance problems. This will help the team to accomplish their tasks and meet deadlines. Any mechanical failure will also be avoided, thus eliminating anything that can get in the way of the business operation.

 

DIY

Having a DIY maintenance kit is helpful to make sure that the machine runs smoothly without any problems. For instance, you can make use of simple cleaning materials to get rid of dirt and any unwanted particles. You can also have a flashlight ready so you can check and identify problems and provide immediate solution.

Professional Maintenance Programs

Maintenance programs such as air compressor repairs can be a great investment to ensure the wellness of your machine. This will also help control costs while improving performance.

A maintenance program is an investment in machine wellness, one that will help control costs and improve performance. In most cases, it covers some parts and labor to all labor, bundles, and supplies.

Good machine maintenance is a simple but effective way to keep your equipment running longer with better quality results. If you are a business owner, you need to make sure that these things are met as it would mean protecting your investment. You definitely wouldn’t want to keep spending your money on unnecessary repairs which could have been avoided in the first place.

 

Top

CNC Plasma Cutter for Sale: How Does it Work?

Posted on July 24, 2018 in Machine Repairs

CNC or also known as computer numerical control has been fused in an assortment of new technologies and hardware. Among them is a CNC plasma cutter. The cutting process goes through an electrically conductive materials with the use of a quickened fly of hot plasma that is directly coordinated on the material that is being cut.

With a CNC plasma cutter for sale that we have in today’s time, copper, steel, metal, and aluminum are just some of the materials that can be cut. Aside from this, so many more conductive materials can be successfully reduced with the use of a CNC cutter.

 

Where is a CNC Cutter Used?

The cutter can be utilized in various conditions. Some of them would be in welding centers, auto repair, mechanical development sites, reclamation shops, and rescue task locales. At the same time, it is utilized by specialists at home or in large creation offices. These plasma cutters have indeed turned out to be an affordable option yet can be used in so many conditions.

Typically, a CNC plasma cutter for sale is a PC-run framework that conveys a plasma burn. The machine moves the light in various ways with the use of numerical coding that has already been modified into the PC. There is another handheld plasma cutting apparatus that is being used like plasmacam machines, although the majority of them are not really furnished with the exact highlights. The machine utilizes mechanical cutting. It is also automated and it comprised of a straight-surged burn. The interface of this light is controlled by CNC.

 

CNC Plasma Cutter

In case you are cutting steel, it’s important to keep in mind that your goal is to remove some parts of the steel plate. In this case, the developments of the light of the machine is primarily controlled by CNC. There is a program that has G and M codes that portrays the exact shape of the piece. Together with proper planning, the coveted cut can be accomplished.

It is important to note that such plasma cutters are not the same as with that in water stream cutters, factories, or other CNC frameworks because of the use of light with extreme warmth. These cutters are another creation option to control different kinds of widely recognized heavy materials. This makes a CNC cutter a great choice when it comes to supporting when there is a need to assemble a number of things.

In many applications, the machine is the preferred option as it can deliver quality results at as faster rate. It is no wonder why in this competitive world where there are now so many industries more than ever, seeing the machine in the market has become a common thing.

 

Top

The Use of Formwork for Concrete in Construction

Posted on July 23, 2018 in Home Resources

Formwork for concrete serves as a support and mould to create structures out of concrete which is poured into a mould. There are different types of formwork used in construction, but they would often differ according the challenges and building requirements.

In most cases, a concrete formwork is used by creating moulds out of aluminum, wood, or steel. This is then left to harden and set and will be stripped afterwards. In the case of stay-in-place types of formwork it is left as part of the entire structure.

With the help of formwork, contractors can cast and construct the main parts of a facility. These are the ones that need to be strong and be able to support other structure such as walls and floors, and even the smaller parts like stairs.

 

Different Types of Formwork

Formwork for concrete used in construction comes in different types. A traditional timber formwork for instance makes use of plywood and timber to form the mould for pouring. This method is a lot compared to others but may not be as effective since wood is not as much strong like steel or metal. However, in complicated parts of the building that needs more attention to detail, a timber formwork is generally used.

For engineered formwork system, prefabricated moulds are often used. These are made from a metal frame either aluminum or steel. This type of formwork is also much cheaper and be used more quickly than a traditional one. It has extremely strong frames and rarely needs replacement, thus reducing cost and labor. Moreover, since this formwork system is engineered, the construction is faster and less manpower is required, which equates to more savings. For simple structures, they can be built using reusable plastic formwork system which consists of lightweight, strong, and interlocking systems.

Another type is the stay-in-place formwork. This one is generally used to support parts of a structure. This type also consists of insulating concrete forms. This means that they are filled with reinforced concrete and once they are set, will be left in place.

 

About Concrete

In the field of construction, especially in this modern time, concrete is used to pour into the formwork systems to come up with a structure of parts of it. It is made of cement along with other substances such as granite, limestone, gravel and sand. It is then mixed with water to form the mixture. When water has been added, the mixture will undergo hydration as the reaction between the cement and water leading to the hard substance of concrete that is used in construction. When concrete is mixed, the quality and success of the concrete in a structure in known as workability. This is why concrete is a staple in the world of construction.

 

Tags: ,

Top

3D Scanner: Why it Should be in Your Engineering Toolbox?

Posted on July 23, 2018 in Computing

Engineers definitely know a thing or two when it comes to innovation. One of the greatest technological treasure that we have at present came about as a result of the innovative and imaginative minds of engineers. While the results of their work are really impressive, it also takes the right set of tools to turn every vision into a reality. One of them is a 3D scanner.

 

The Growing Demand for 3D Scanning

Among the best tools that any modern engineer has ever included in their toolbox is a 3D scanner. The engineering industry even makes up a large market for this scanner. Regardless of the role, engineering, manufacturing, development, design, testing or surveying- 3D scanning technology is utilized to save money, time, and materials. Due to the affordability, efficiency, and accuracy of the scanner, it makes it an ideal tool for engineers, especially in prototyping.

There are now so many established companies that are starting to take advantage of the technology and integrates it to the product design and development phase in order to streamline operations and to lessen the costs. This demand has led to close competition among the developers of this technology that are all hoping to create the next 3D device at a cost-friendly price.

These companies are also making continuous improvements in their 3D printer hardware and software to offer people with all the possible advancements and to reduce the high price of this sophisticated equipment. Given the right software and scanner, conversion of point clouds to CAD data can be done quickly, easily, and at a cost-efficient manner.

 

Prototyping

Usually, reverse engineering data is used during the prototyping phase. The accurate data generated by the scanner, can immensely help in the creation of the product. Engineers can also turn an abstract idea or design into a physical object by means of creating a prototype. This can be made of foam rubber, wood, plaster, clay, or other materials.

Regardless of the material that is being used, it becomes possible to make changes to the prototype in terms of time and materials. By scanning this prototype, even if its hand-modified, engineers can create an exact 3D model and make use of the digital format for further development or design refinement.

With the help of the 3d scanners, an engineer can immediately design and develop a prototype. With the help of a printer, the model can be printed in just a matter of hours in-house. When it is printed, the product be touched physically and seen in all angles. With this, it becomes possible to analyze the strength and weaknesses of the product and evaluate it before performing additional prototyping or bringing it to the market.

It’s undeniable that our world today is greatly influenced by new technologies. But this is something that we should be thankful for as these technologies have made our lives so much easier.

 

Top

Balusters and Balustrades: Are they the Same Thing?

Posted on July 23, 2018 in Home Resources

Balustrades have been widely used in creating some of the best world structures that were built using various architectural styles. As time passed by, these features that were used to be made of later wood and stone, concrete and metal as utilized in their construction. Along with the advancements in technology, materials like vinyl started to be commonly used today. This is also why glass balustrade has become a popular choice in residential and commercial installations.

A balustrade comes in various styles. There are those that are frameless, semi-framed, or fully-framed. Having them in your installation will not only add beauty but will also make any structure more functional. It can also be used both in interior and exterior applications.

However, there are many people who get confused whether a balustrade and baluster are the same thing. Knowing the differences between these two will help you in choosing the right material for your specific needs.

 

Understanding the Differences

The majority of customers are eager to know about the pros and cons of these two and whether there is really a difference or not. Below are some important things that will distinguish the two from one another.

 

Balusters

These are vertical posts on which a railing is being supported along a terrace or balcony. The posts can be made of wood, iron, vinyl, stone, concrete, etc. The word originated from the French word baluster, from Latin word balaustium, Greek word balaustion, and Italian balaustro.

 

Balustrade

This one is the entire installation and includes balusters positioned at equal distances from one another. The balusters are the ones holding up the railing that can be made from different materials. The entire feature creates a decorative edge along the terrace, balcony, balcony, or in any internal and exterior structures like landings, staircases, and others.

In simple terms, a baluster is the single post while a balustrade is comprised of several balusters forming a large unit which is then used as an aesthetic or safety feature.

 

Different Baluster Shapes

Balusters come in various shapes that are specifically designed to blend in with the style of the structure where it is supposed to be installed in. It can be used to add effect in any indoor and outdoor application. When it comes to the style and design, the sky is the limit for this one as it ranges from simple ones with clean lines, to the more elaborates designs and ornamental features with different embellishments.

Modern-Day Glass Balustrades

At present, any commercial or residential structure across the world make use of glass balustrades to add elegance and style to their buildings. Glass is a great choice as it creates an illusion of being open and having more space. These are also strong enough to be used in different applications.

Improve your home with this durable, weather-resistant aluminium screens that require minimal maintenance.

 

Top